济南装载机有哪些用途？

1、装载机主要用于铲装土壤、砂石、石灰、煤炭等散状物料,也可对矿石、硬土等作轻度铲挖作业.装载机通过换装不同的辅助工作装置还可进行推土、起重和其他物料如木材的装卸作业。在道路、特别是在高等级公路施工中,装载机用于路基工程的填挖、沥青混合料和水泥混凝土料场的集料与装料等作业,除此之外还可进行推运土壤、刮平地面和牵引其他机械等作业.
Mainly used for loading shovel loaders soil, sand, lime, coal and other bulk materials, but also on the ore, hard soil, etc. for mild shovel digging operations. Loader work through dress different auxiliary devices can also be bulldozing , lifting and other materials such as timber handling operations. Roads, especially in highway construction, engineering roadbed fill loader for digging,asphalt and cement concrete aggregate and stockyard operations such as loading, in addition also for pushing the soil, Calibrating the ground and pulling other machinery and other operations.

2、铲装停机面以下的土壤 
在公路工程中，可利用装载机剥离表层土壤，此时装载机宜采用直形斗刃铲斗，类似于推土机作业。对于难铲的土壤，为了减小铲装的阻力，可操纵动臂使铲斗上下颤动或稍改变一下铲土角，直至铲斗装满为止；装满物料后收斗。将铲斗举升到运输位置，驶离工作面，运至卸料处。这种方法也常用于采集河沙，亦可用于作业场地的平整。  
In highway engineering, you can use the loader stripping topsoil, then the loader bucket should adopt the straight edge of the bucket, similar to the bulldozer work. For difficult shovel soil, in order to reduce drag shovel, steerable boom bucket fibrillation or shovel to change the angle slightly up and down, until the bucket is filled up; after closing bucket filled with material. The bucket give rise to the transport position, leaving the face, transported to the unloading place. This method is also used to collect sand, can be used for leveling the job site.

3、铲装土堆  对二灰土基层的施工，常采用石拌稳定土，稳定土拌和时，可利用装载机装土堆。
Two shovel mounds of construction dust grassroots, often using stone mix stabilized soil. When stabilized soil mixing, you can use the loader mounted mound.

济南装载机：http://www.sdyongbaojixie.com/