你好!欢迎进入山东永保装载机械官网!  联系电话:139-6410-8518

新闻资讯当前位置:首页 > 新闻资讯

装载机制动液的加注方法详解

[ 发布日期:2023-01-07 15:10:28 ]    来源:永保机械    浏览:1354次

1.总液压泵贮油室加注植物性制动液,液面高度距加油口15~20mm。要经常检查,液体不足时应及时添加。
1. The total pump vegetable oil reservoir chamber filling brake fluid, liquid height from the filler neck 15 ~ 20mm. Should always check when insufficient time to add the liquid.

2.山东装载机制动液切勿混入矿物油,否则会迅速损坏橡胶元件。
2. Do not mixed with mineral oil brake fluid, otherwise it will quickly damage the rubber components.

3.清除液压管路、贮油室等处的积垢。
3. Clear the hydraulic lines, oil storage room, etc. fouling.

4.山东装载机加满制动液。
4. Fill the brake fluid.

5.启动发动机,待空气压力表读数为0.68~0.7MPa后停车。
5. Start the engine, the air pressure gauge readings until after 0.68 ~ 0.7MPa parking.

6.放气嘴上套入放气用的透明管,管的另一端放入盛油盘中。
6. deflated deflated by mouth set into a transparent tube containing the other end of the tube into the oil pan.

7.连续踏下紧急制动踏板,松开制动踏板。放气时,还要向贮油室及时补充制动液,以免空气再度进入系统。
7. Continuous depress the emergency brake pedal, release the brake pedal. When deflated, but also to replenish the oil reservoir chamber brake fluid to avoid air re-enter the system.

 

Copyright © 2023-2029 山东永保装载机械  版权所有

联系人:周经理    手 机:139-6410-8518

地 址:山东济南市商河县怀仁镇工业园

备案号:鲁ICP备14006215号-1    技术支持:亘安信息

扫一扫二维码!