你好!欢迎进入山东永保装载机械官网!  联系电话:139-6410-8518    0531-84917777

新闻资讯当前位置:首页 > 新闻资讯

济南装载机配件谈转斗自动前倾怎么办?

[ 发布日期:2023-01-07 15:10:28 ]    来源:永保机械    浏览:351次

1、济南装载机配件http://www.sdyongbaojixie.com/如果分配阀中的转斗前倾油路损坏,使转斗前倾油路中的油流入油箱,也会导致转斗自动前倾。检查转斗滑阀,滑阀处于正常状态。
Jinan loader accessories if the dispensing valve in the bucket forward the oil damage, so the bucket forward inflow of oil in the oil tank, will automatically lead to the bucket forward. Check the bucket spool, the spool is in a normal state.

2、济南装载机配件如果转斗双作用安全阀处常开状态,也能导致转斗自动前倾。因为转斗的大、小腔双作用安全阀是对转斗小腔起防止过载和补油作用的,拆检双作用安全阀后发现,锥阀前端有一黑色小橡胶块,经辨认,此黑色小橡胶块是转斗缸受损油封的残块。
If the bucket loader accessories Jinan double acting valve at the normally open state, can also lead to the bucket automatically forward. Because of the large bucket, double acting valve is small chamber from the bucket to prevent overloading the small chamber and fill the role of oil, dismantling the double acting valve found that the tip of the cone valve has a small black rubber pieces,after identification, the black small rubber bucket cylinder block is damaged seal of debris.

3、济南装载机配件http://www.sdyongbaojixie.com/正常状态下,锥阀应是闭合的,现小橡胶块处于锥阀前端,将锥阀顶开使其处于常开状态,造成转斗缸卸载、活塞杆收回并通过连杆机构导致转斗自动前倾。最后,将转斗双作用安全阀内的小橡胶块取出,转斗即不再自动前倾。
Jinan loader accessories normal state, the cone valve should be closed, and now a small rubber block in the front cone valve, the poppet valve to open the top so that it is always on, causing the bucket cylinder unloading, the piston rod back through Linkage automatically lead to the bucket forward. Finally, the small rubber piece bucket inside the double-acting valve removed, the bucket that is no longer automatically forward.

Copyright © 2023-2029 山东永保装载机械  版权所有

联系人:周经理    手 机:139-6410-8518     电 话:0531-84917777

地 址:山东济南市商河县怀仁镇工业园

备案号:鲁ICP备14006215号-1    技术支持:亘安信息

扫一扫二维码!