装载机的操作要等油温稳定后

装载机的所有操作都需要等到油温下降后再进行操作，下面主要给大家介绍一下装载机操作要点，希望对大家有所帮助。

1、装载机接油容器放在放油螺栓下，取下螺栓，并放油。为了达到避免山东装载机设备油箱内的油突然溢出，松开螺塞，并逐渐取下螺栓。
Shandong loaders drip container placed under the oil drain plug, remove the bolts, and drain. In order to achieve avoid oil Shandong loader equipment suddenly overflow tank, loosen the drain plug, and gradually remove the bolts.

2、待得装载机油箱放油后，装在螺塞并拧紧，接油容器放在小装载机变速箱滤油器下。
After Shandong loaders to be too put oil tank, mounted on plug and tighten, then the oil container on a small loader gearbox oil filter.

3、取下装载机变速箱滤油器放油螺塞，放油后拧紧螺塞，取下螺塞、盖，并取出滤网。
Remove Shandong loader gearbox oil filter drain plug, after the release of the oil drain plug and tighten, remove plugs, cover, and remove the filter.

4、清除粘在山东装载机滤网上的赃物，然后用柴油或清洗油清洗，重新安装滤网。
Clear stuck on the filter swag Shandong loader, then wash with diesel or oil cleaning, re-install the filter.

5、装载机经加油口注入一定数量的机油，加油时，检查油位。
Shandong loader through the oil filler injected a certain amount of oil, refueling, check the oil level.