装载机安装时应如何防止油液的污染

小型装载机日常作业都需要油的润滑，那么小型装载机的安装如何防治油液的污染，现在我们来了解一下小型装载机安装时应如何防止油液的污染。
Small loaders daily operations require lubrication oil, then install a small loaders how the oil pollution prevention, and now we should take a look at how to prevent pollution of small loaders install the oil.
小型装载机液压泵的吸油口应安装粗滤器，且吸油口处应距油箱底部一定距离；小型装载机出油口处应安装高压精滤器，且过滤效果应符合系统的工作要求，以防污物堵塞而引起液压系统故障；小型装载机的液压油箱隔板上应加装过滤网，以除去回油过滤器未滤去的杂质。
Small loader hydraulic pump suction port should install strainers and suction mouth should be a certain distance from the bottom of the tank; small loader should be installed at the oil port high pressure fine filter, and the filter effect should be consistent with the system requirements for the work to antifouling clogging caused by a hydraulic system failure; should install filters on small loaders hydraulic separator tank to remove the oil filter is not filtered back to impurities.
小型装载机液压缸上应安装金属防护圈，以防污物被带进缸内，并可防止泥水和光辐射对液压缸侵蚀而引起泄漏；液压元器件安装前应检查、清理干净其内部的铁屑及杂质；定期检查液压油，一旦发现油液变质、泡沫多、沉淀物多、油水分离等现象后应立即清洗系统并换油。
Loader should be installed on a small metal cylinder guard ring to prevent dirt being brought into the cylinder, optical radiation and prevent mud and erosion caused by the hydraulic cylinder leakage; hydraulic components should be checked prior to installation, clean the inside of the iron debris and impurities; regularly check the hydraulic oil, once discovered oil deterioration, foam and more and more sediment, oil and water separation phenomenon should immediately wash system and oil changes.
新油加入小型装载机的油箱前应经过静置沉淀，过滤后方可加入，必要时可设中间油箱以进行新油的沉淀和过滤，确保油液的清洁。
Small loader before adding new oil tank should be standing after sedimentation, filtration before adding, if necessary, can be set for the middle of the tank precipitation and filtration of new oil to ensure clean the oil.